MVS400
Features:
- Real Time Clock
- NEMA 3R rated enclosure
- Premium Equalization Scheduler
- Auto Start/Stop
- Closed Loop Gas Control
- CE and UL 1564 Certified
- 90% Efficiency
- 96% Power Factor at full load
- Battery Voltage Range 24V to 96V
- Battery Monitoring Identifier Module (BMID) charger and battery management
- Electrolyte Immersed Thermistor (surface mount Thermistor available for gel batts).
- Multi-Voltage Flexibility
- Maintains up to 250 charge Logs & 50 fault logs
- Automatic Shutdown upon disconnection of battery
- Overvoltage/reverse voltage protection
- May be wall, ceiling, pedestal, rack or jet-bridge mounted with up to 150ft between charging stations
- High-efficiency IGBT power electronics
- Easy front and rear access to internals
- Auto Thermal Shutdown - shuts off charge if battery exceeds 140°F
- Dual DC output cables capable of 250 vdc each or 500 vdc single
- Single line AC feed for easy installation
- Simultaneously can charge all common battery type(s) and voltage ranges.
(i.e. 24, 36, 48, 72, 80 vdc)
- RS 232 laptop interface is standard
Specifications:
- Efficiency 90%
- Number of Data Logs 250 charge logs & 50 fault logs
- Response Time 10ms (to pilot loss)
10ms (to shutdown command)
AC Power Quality at Rated Power:
Utility Requirement:
- Voltage 3 Phase, 480V (600V Optional) +/- 10%
- Frequency 60Hz (50Hz optional)
- Circuit Breaker Rating 70A (480V)
Application:
- Heavy duty electrical ground support equipment
- Ideal for operations with staggered breaks
- Small footprint allows for installation in congested gate areas, bagrooms and the like.
- Indoor/Outdoor ready
- Additional power stations can be installed in numerous configurations to work with any operation scenario
Operation Envelope:
- Battery Voltage Range 24V to 96V
- Power Rating 40KW each port
- Maximum Output Current 250ADC (dual) / 500ADC single
- Idle Power 27 watts
- Output Cable 320 Burton/Skyco (standard: 15ft)
- Full Load Amp Draw 50 amps AC (480V)
Physical Specification (Master/Rectifier)
- Weight: 915 lbs
- Dimensions: 60”H x 32.4” W x 21.9”D
Physical Specification (Power Stations)
- Weight: 304 lbs
- Dimensions: 30”H x 30” W x 19”D
Options:
- Automatic Watering Kit Available
- Cable Management – Pole Kit or Pogo Kit
- Extended Warranties
- 600V Optional
- 60 or 50Hz Available
- Web-based PosiNet Data Management
- High Visibility Status Lights
- Various Charger Mounting Stands
Fastcharge GSE
Catalouge